WLED now has the ability to remap your LED strip programmatically.
What is it?
This allows us to treat the WLED strip as if it is wired in any way - we can then use the mapping feature to address the strip in any order. This allows for matrix support, serpentine runs and such.
How do we do it?
Navigate to the edit page for your WLED device by adding /edit
to its’ address - for example, https://my-led-device.local/edit
Use this edit page to create a file called ledmap.json
.
ledmap.json
file needs to be a JSON formatted file with the the key being “map” and the value being an array of numbers representing the new order of pixels. The position of values in the array is the “natural” order of LEDs and the value entered is the new position.
The ArduinoJSON library is **extremely** white-space sensitive.
If your ledmap.json
file is not working, check for white-spaces where they should not be. The LED positions are zero-indexed.
Multiple maps are supported in the latest versions by using ledmapx.json
where x is a number. Maps can be selected in a preset using {"ledmap":x,...
.
Use -1 in the map for gaps/blank/nul LEDs.
Examples
In the below example (formatted multiple ways), we remap a strip of four LEDs from a physical order of 0 1 2 3 into a new order of 0 2 1 3.
{"map":[0,2,1,3]}
{"map":[
0,2,1,3
]}
{"map":[
0,2,
1,3
]}
This is another example that switches direction every 5 LEDs. It could be formatted any of the three ways demonstrated above.
{"map":[0, 1, 2, 3, 4, 9, 8, 7, 6, 5, 10, 11, 12, 13, 14,
19, 18, 17, 16, 15, 20, 21, 22, 23, 24, 29, 28, 27, 26, 25]}